Hi, Randy Watson, from Old Fort,NC.

This MotorMate is one of the best engine holder or stabilizer I've ever saw. Very professionally made and sturdy as ever. I have it on my Ranger 520 with the 225 EFI Mercury and it holds the engine very firm. Congratulations on a superb product. Keep me in mind if I can help you promote this MotorMate.

Thank You, Randy

From: Grigsby < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Sent: Wednesday, September 26, 2012 6:00 PM
Subject: Motor Mate is the Best

I recently upgraded my outboard to the new Yamaha SHO 225 for my Ranger 520, and could not be happier; but when I wanted to purchase a motor support I remembered, from past experiences, the limitations most of them demonstrated.  I have used the Swivl Eze units (their "caps" were always an issue), the Shock Eze (back to issue of road beatings) and the Motor Stiks (not recommended for the SHO and you have to use the limiters on the Sea Star systems to stop motor movement) before I found the Motor Mate system.
 
I am really impressed that it so easy to use, locks down the motor to prevent turning and prevents road shock, and it is simple to install and remove.  It was a no brainer to use this unit, given the cost of the SHO, I considered it an investment with a great return on value; and it's Made in America.
 
Whether you have a SHO, Merc or ETec, there units are definitely for you.  I found customer support to be great, quick responses for both voice and email and they listened to me and treated me with respect and courtesy, even when I asked a silly question,.
 
I really wish I had found them earlier, but now I know and I am telling my friends, guys on my tournament trail and my dealer about this simple, reliable product.  I am particular about my equipment, if you are too then let me again say this is the product you need, you will be satisfied.
 
John G., Hendersonville, Tn.

From: m.richardson
To: " This e-mail address is being protected from spambots. You need JavaScript enabled to view it " < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
Sent: Tuesday, June 5, 2012 8:35 AM
Subject: Mike Richardson feedback

Hey Clifton - As you know, we own a lodge in Northern Ontario, Canada and as a professional guide, travel thousands of miles with our boats. I have had to replace dozens of pole transom supports over the years and went in search of a better product. I came across Motormate and it was the answer I was looking for. Motrmate works like a dream, quick, easy and gives the motor the true support that it needs.

This product serves the motor so well that even when the  end cap came off during a recent trip home from Ontario, it still held the motor solid. I had left you a message that evening regarding this issue and within two days had the replacement. I am so impressed with your customer service and the true care and concern that you have for your product and your customers. I have been recommending this product to all the fisherman that I come in contact with and will continue to do so!  Keep up the excellent work and hope to see you on the creek sometime!
Good Fishing,
 
Capt. Mike Richardson
I.G.F.A. Certified Captain

From: Sammie Meadows

To: MARSHA BRADLEY < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
Sent: Wednesday, May 30, 2012 9:58 PM
Subject: Re: MOTORMATE

Yes and it is awesome!  I'm posting a pic to the bbc forum to brag on it.  It's soo much more stable than the toys Yamaha ships with their outboards.

Thanks again!

Sammie Meadows - iPhone

From: FREDDIE HENLEY < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
To: MARSHA BRADLEY < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
Sent: Monday, February 27, 2012 5:44 PM
Subject: Re: Motormate.

Marsha, I received your replacement motormate for my Yamaha 250.  I installed it and have used it 2 times.  The redesigned brackets and motormate appear to be holding up fine.  I am more than impressed by your customer service and prompt reply.  This was much more than I was expecting and has restored my faith in the goodness of people ,  I am truly grateful and will not hesitate to recommend your product at every opportunity.  I have shown and demonstrated it to several people and all have been impressed.  Again, thank you.
 
Sincerely
Freddie Henley

From: Brad & Diana Closterman < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Sent: Saturday, January 14, 2012 6:30 PM
Subject: In the outdoors with Brad and Brian

Motor Mate
 
I just bought and recived my Motor Mate what a great product. I have a outdoor radio show here in Missouri. After using the Motor Mate I would like to talk with someone about In the outdoors with Brad and Brian endorsing and promoting Motor Mate. Please drop me a line with a name and phone number and I will call so we can talk.
 
Thank you for your time
 
Brad Closterman
In the outdoors with Brad and Brian
Email This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Cell 660 441 7726

CLick on the link below to see what Brad Weigmann, Outdoor Writer, Photographer, and Professional Fishing Guide has to say about the motormate!

http://www.bradwiegmann.com/tackle/accessories-and-electronics/664-motormate-outboard-motor-locking-system.html

From: LARRY VAN NUIL < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Sent: Monday, December 19, 2011 8:35 PM
Subject: Motormate

Thank you very much for the super fast shipping.
It only took 2 days to get my motormate I'am very impressed with you guys.

Thanks again,

Larry VanNuil
Holland Mi.

From: Charlie Brown < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
To: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Sent: Saturday, December 10, 2011 11:42 PM
Subject: Motormate thoughts

I purchased a Motormate for my Ranger Comanche, 522DVX bass boat at the 2011 FLW Championship. The Motormate I purchased is for a Mercury OptiMax 225 Hp 2003. Since I acquired the Motormate I have trailer the boat over 4000 miles without a single problem. It holds the motor steady, no bounce and the motor stays straight. The Motormate is easy to install and remove; it easily stores in the storage compartment of my Avalanche. It is the 4th devise I have purchased to support the motor and I believe it is the last I  will need to purchase. 
 
The cups that you lower the motor into are far superior to what I was using. I had to replace the bushings on the previous devise I was using 3to 4 times a year. With the Motormate no bushings to replace. The design of the unit cups do not hit the grounding wire on the motor so you are not cutting it into. If you cannot replace the ground yourself it is an expensive repair. The stainless steel components of the Motormate do not rust.
 
To sum up my thoughts – Excellent design, great quality and works as advertized.

Email:- This e-mail address is being protected from spambots. You need JavaScript enabled to view it

My new supports for Yamaha engine last week----these are working out great----a lot stronger than previous ones Best support I have ever used-absoluting locks the motor in place-no movement at all-saw these last winter at Charlotte Boat Show-----glad I finally made change over

From: Paul Tilley < This e-mail address is being protected from spambots. You need JavaScript enabled to view it >
Subject: motormate

I just got mine today,  man you guys ship fast. I was worried about the mount on my Yamaha. The bracket works great, easy to install. I got guys looking at mine already. Great job

Thanks,
Paul Tilley

Email:- This e-mail address is being protected from spambots. You need JavaScript enabled to view it :-  I just wanted to let you know how much we love our MOTORMATE. It is so easy to use and it holds the outboard stable with no movement from side to side while transporting the boat. I highly recommend this to everyone.

Name

Rich D.
Greenville, Tx

Email:- This e-mail address is being protected from spambots. You need JavaScript enabled to view it :-  i would like to say Thank You, to Clifton & Marsha, for going out of there way to make a customer happy, I was given the wrong size toter for my Yamaha, and Clifton was kind enough to swap it out for the right 1, that is what I admire about this company! I don't have to look for another motor toter any more I have the best now!!!! I will always have a motormate from now on. Best Product for the tournament fisherman.Thank You Clifton & Marsha!

Name

Email:- This e-mail address is being protected from spambots. You need JavaScript enabled to view it :- We placed an order on October 5th for the motormate, and recieved it promptly by Friday, October 7th. When we opened the package, one of the brackets were not placed in the box. We called immediately and talked with them, and they were very sorry and it was just an honest mistake. I explained I needed it for a away tournament by Wednesday, October 13th, and they immedately offered different ways to get the other bracket to me even offered to drive it to me.  They went out of their way to over-night ship the bracket to me by Monday, October 10th. When I recieved the package, there were 2 brackets inside just to make sure I had the right one. I feel very good about this product and the people who stands behind it. This is the best I've ever been treated.

Name

Thank you MotorMate,

Brandon James

A user just sent you a message via the web contact form. The details are as follows:

Email:- This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Name:-  I purchased a motormate after seeing them at the expo in Chattanooga TN. I live in California so I waited till I got home to purchase  one. On my first trip to the lake my motormate had fallen of because of a defective bracket on the motormate. Well I thought I was out of luck considering I lived across the country and the motormate was gone. I figured I would call them and let them know what happend. To my surprise they said we understand and we will make it right. They said that they had redesigned the faulty part and would send me an enitre unit free of charge and free shipping. That was not what I was expecting but was very pleased that I was treated with respect and understanding of the situation. The new motormate for my yamaha 225 hpdi is the best transome saver I have ever used and the company stands behind their product.They have called me a few times to follow up and make sure that I was happy and every thing was working properly. It's very rare now adays to see a company that cares so much about their customers.

loyal customer,
        Philip Garcia
        Yuba city,California

A user just sent you a message via the web contact form. The details are as follows:

Email:- This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Name:- Thanks Motormate for making a great product!  Your bracket was designed very well,is built rock solid, looks sharp, and it locks down the big motor solid.

Mike Matkowski